DURA-HOLD II® Coping, Walls Ontario | Unilock

Bitmap We’re Hiring! Start your career at Unilock and join our growing team.

en
    CN EN ES

Dura-Hold II ®

Dura-Hold II is similar to Dura-Hold in appearance, but is just over half the size, making it economical in terms of material cost, speed and efficiency for lower retaining walls. Its large scale (standard size weighs 940lbs) is disguised by false joints which cast bold shadows to give the appearance of several individual blocks in each unit. Build gravity walls up to 4ft (1.2m) or grid reinforced walls up to 25ft (7.6m) high with proper engineering under typical conditions. Concrete tie-backs or geogrid give this wall various engineering options. Coping units are also available.

Unilock DuraHold 2 Closed End Coping
-
Unilock DuraHold 2 Closed End Coping
-

Dura-Hold II ®

Dura-Hold II is similar to Dura-Hold in appearance, but is just over half the size, making it economical in terms of material cost, speed and efficiency for lower retaining walls. Its large scale (standard size weighs 940lbs) is disguised by false joints which cast bold shadows to give the appearance of several individual blocks in each unit. Build gravity walls up to 4ft (1.2m) or grid reinforced walls up to 25ft (7.6m) high with proper engineering under typical conditions. Concrete tie-backs or geogrid give this wall various engineering options. Coping units are also available.

Colors
Shape and size
Special order
img
COPING CLOSED END
1,830mm x 300mm x 360mm
72" x 11 7/8" x 14 1/4"
Special order
img
COPING STANDARD
1,830mm x 300mm x 360mm
72" x 11 7/8" x 14 1/4"
Technologies
Technologies
Classic
img

Classic

Classic Coat helps protect the surface texture and enhances the color of Classic products. For purchasers who prefer the look of a sealed project, these factory-sealed products save the time and expense of after-market sealing.

Our technologies
Colors
NATURAL
Pick a color
NATURAL
Information
Information
Packaging
Downloads

Dura-Hold II ®

Dura-Hold ®II has the same visual appearance of Dura-Hold, and is generally used in conjunction with Dura-Hold for areas of a project where the massive size of Dura-Hold is not required but the look needs to be maintained. Each module weighs 940 lbs (426 kg) - which is half the weight of Dura-Hold - but the installation rate/coverage is the same. From a cost standpoint, Dura-Hold II is very efficient.

Applications – Structural retaining walls for large embankments

Capacity – Gravity walls up to 39” (1m). Geogrid reinforced walls up to 23 ft. (7m)

Recommended Base Stabilization – one layer of DriveGrid™ stabilization grid between subgrade and base material. Use under Standard Base or Permeable Base.

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Leveling – Leveling large retaining wall blocks directly on top of gravel is difficult. U-Grip Base units or universal base pads are recommended under most Unilock walls for improved accuracy and make for a speedier installation. For Durahold II, turn the U-Grip base units 90 degrees for a larger front to back latitude for the blocks to sit on. For larger projects, it is recommended to install a poured concrete leveling pad reinforced with rebar. You must ensure that the concrete is poured and finished perfectly in order for the blocks to sit properly without cracking.

Connection – features a tongue and groove connection.

Handling – This is a mechanically placed wall system. Special clamps for lifting are available for use during project.

Coping - This wall requires the Durahold II specific coping. Coping attaches with tongue and groove connection. No adhesive required.

Layers per BundleLin Ft per Bundle - SailorUnits per BundleUnits per LayerUnits per FcFtLbs per LayerLbs per BundleLbs per UnitLin Ft per Layer - SailorFcFt per LayerFcFt per BundleFcFt per Unit
COPING CLOSED ENDCOPING STANDARD
Layers per Bundle44
Lin Ft per Bundle - Sailor24.1024.10
Units per Bundle44
Units per Layer11
Units per FcFt0.170.17
Lbs per Layer884884
Lbs per Bundle35363536
Lbs per Unit884884
Lin Ft per Layer - Sailor6.026.02
FcFt per Layer6.026.02
FcFt per Bundle24.0824.08
FcFt per Unit6.026.02

Knowledge
Center

Skip to content