fbpx THORNBURY™ Pavers | Unilock Michigan
EN

THORNBURY

Thornbury is similar to Beacon Hill Flagstone in its resemblance to natural cut stone, but is more dramatic in its surface texture and smaller in scale. A larger joint space between units adds to a more rugged look and enables water to flow through when the product is installed on a permeable base. Thornbury is a popular choice for driveways as its scale makes it capable of handling vehicular loads, and its permeability can significantly reduce puddling and ice build up in winter. Sold in a random bundle, three moderately sized units can be laid in a number of patterns for a more, or less, random appearance for virtually any application, all with the added reassurance of Enduracolor.

Thornbury 350x420x70 Sierra MI
-
Thornbury 350x420x70 Sierra MI
-

THORNBURY

Thornbury is similar to Beacon Hill Flagstone in its resemblance to natural cut stone, but is more dramatic in its surface texture and smaller in scale. A larger joint space between units adds to a more rugged look and enables water to flow through when the product is installed on a permeable base. Thornbury is a popular choice for driveways as its scale makes it capable of handling vehicular loads, and its permeability can significantly reduce puddling and ice build up in winter. Sold in a random bundle, three moderately sized units can be laid in a number of patterns for a more, or less, random appearance for virtually any application, all with the added reassurance of Enduracolor.

Colors
Applications
Driveway
Patio & Walkway
Permeable
Shape and size
Random Bundle
img
LARGE RECTANGLE
350mm x 420mm x 70mm
13 7/8" x 16 5/8" x 2 3/4"
img
MEDIUM RECTANGLE
210mm x 350mm x 70mm
8 3/8" x 13 7/8" x 2 3/4"
img
SMALL RECTANGLE
173mm x 210mm x 70mm
6 7/8" x 8 3/8" x 2 3/4"
img
LARGE RECTANGLE
350mm x 420mm x 70mm
13 7/8" x 16 5/8" x 2 3/4"
img
MEDIUM RECTANGLE
210mm x 350mm x 70mm
8 3/8" x 13 7/8" x 2 3/4"
img
SMALL RECTANGLE
173mm x 210mm x 70mm
6 7/8" x 8 3/8" x 2 3/4"

Product Gallery

Thornbury Driveways Bavarian 1G6A0890
Thornbury Driveways Bavarian 5300
Thornbury Patios Bavarian 4881
Thornbury Patios Bavarian 5494
Thornbury Patios Sierra 3425
Technologies
Technologies
EnduraColor
img
img

The refined surface of Unilock EnduraColor products is achieved with a two step manufacturing process that combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. This process protects the surface from the appearance of fading over time because the top layer prevents large, lighter color aggregates from ever showing through.

Our technologies
Colors
SIERRA
BIRCH
Pick a color
SIERRA
BIRCH
img
Jointing
Jointing

DETAIL MATTERS

The color of jointing sand you choose can have an impact on the overall look and feel of your paver patio, driveway or pool deck. Experiment with different options here.

Black Sand
Grey Sand
Tan Sand
Information
Information
Packaging
Downloads

THORNBURY

Thornbury has a modern flagstone appeal and is an attractive and economical solution for permeable and non-permeable projects. Paver-spacer technology allows for joint openings which facilitate the drainage of water into the subgrade making it perfect for site drainage, managing water runoff, or water harvesting projects.

Recommended Base Stabilization – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Alternative Permeable Bedding Course – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

Special Note: Concrete Direct Overlay – In some areas of the country and in some applications pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:

  1. Concrete integrity – concrete must be in good condition, and not crumbling
  2. Drainage slope – concrete below must be sloped away from all buildings and structures
  3. Drainage holes – In lowest areas of the concrete, drill 1” holes in concrete (on 12” centers) and fill holes with ¼” chip (ASTM No. 8)
  4. Base drainage - the area below the concrete must not be subject to frost movement
  5. Surface - surface must be totally smooth and flat equivalent to the desired finished surface
  6. Waterproofing - may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface.
  7. Jointing Sand - Use an impervious polymeric sand when installing over concrete

Jointing Material and Joint Stabilization 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements.

Handling – This product has no special handling requirements.

Edge Restraint - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 Sealers 

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

The Americans with Disabilities Act Accessibility Guidelines (ADAAG) provides measurable criteria to determine compliance, not individual product evaluation. Gaps, joints or openings, greater than ½” horizontal and ¼” vertical should be avoided as they can disrupt wheelchair maneuvering (United States Access Board – Guidelines and Standards).

Unit Thickness (mm)
Layers per Bundle
Sq Ft per Bundle
Sq Ft per Layer
Sq Ft per Unit
Units per Bundle
Units per Layer
Lbs per Bundle
Lbs per Layer
Lbs per Unit
(70) RANDOM
Random Bundle
70
8
88.61
11.08
0.92
96
12
2,837
354.63
29.55

Knowledge
Center

Skip to content