fbpx UMBRIANO®COPING Coping Ontario | Unilock
EN

UMBRIANOCOPING

The granite-like appearance of Umbriano comes available in both a chamfered and bullnose coping, providing the perfect edge for step treads and pool decks with its non-slip surface texture. Its unique, mottled surface is achieved with ColorFusion™ Technology that randomly disperses rich color and granite particles. Umbriano coping comes factory-sealed during the manufacturing process with EasyClean™, providing integral stain resistance for faster cleanup of spills before a stain takes hold. Compatible with both Umbriano paver and wall products, Umbriano Coping provides a cohesive and sophisticated solution for your landscape design. 

Umbriano Chamfer 360x600x60 WinterMarvel
-
Umbriano Chamfer 360x600x60 WinterMarvel
-

UMBRIANOCOPING

The granite-like appearance of Umbriano comes available in both a chamfered and bullnose coping, providing the perfect edge for step treads and pool decks with its non-slip surface texture. Its unique, mottled surface is achieved with ColorFusion™ Technology that randomly disperses rich color and granite particles. Umbriano coping comes factory-sealed during the manufacturing process with EasyClean™, providing integral stain resistance for faster cleanup of spills before a stain takes hold. Compatible with both Umbriano paver and wall products, Umbriano Coping provides a cohesive and sophisticated solution for your landscape design. 

Colors
Applications
Coping
Shape and size
img
COPING BULLNOSE
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING BULLNOSE
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING BULLNOSE
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING BULLNOSE
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING BULLNOSE
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING CHAMFERED
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING CHAMFERED
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING CHAMFERED
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING CHAMFERED
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
img
COPING CHAMFERED
600mm x 60mm x 355mm
23 5/8" x 2 3/8" x 14"
Technologies
Technologies
EnduraColor
EasyClean ™
ColorFusion ™
img
img

The refined surface of Unilock EnduraColor products is achieved with a two step manufacturing process that combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. This process protects the surface from the appearance of fading over time because the top layer prevents large, lighter color aggregates from ever showing through.

Our technologies
img

EasyClean ™

Unlike after-market sealers which merely coat the top, EasyClean goes beyond the surface and becomes integral to the product during manufacturing. The result is enhanced surface color and protection from stains.

Our technologies
img

ColorFusion ™

Color and granite particles are randomly dispersed using proprietary ColorFusion technology to achieve a unique mottled surface that resembles natural granite.

Our technologies
Colors
WINTER MARVEL
SUMMER WHEAT
FRENCH GREY
GRENADA WHITE
MIDNIGHT SKY
Pick a color
WINTER MARVEL
SUMMER WHEAT
FRENCH GREY
GRENADA WHITE
MIDNIGHT SKY
Information
Information
Packaging

Umbriano™ Coping

Umbriano is the ideal pool deck, patio or driveway paver. Umbriano is unaffected by chlorine, salt pool water and is resistant to de-icing salts as well. The clean, sleek and modern lines make it the most contemporary paver available. Umbriano also has Easy Clean Technology allowing for quick cleanup of food and other dirty spills!

Recommended Base Stabilization – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.

Special Note: To achieve applications other than the recommended based on concrete paver aspect ratio alone, additional base structures such as Drivecell and Trass base may be utilized. Contact your local representative for more information.

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Alternative Permeable Bedding Course – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

Special Note: Concrete Direct Overlay – In some areas of the country and in some applications pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:

  1. Concrete integrity – concrete must be in good condition, and not crumbling
  2. Drainage slope – concrete below must be sloped away from all buildings and structures
  3. Drainage holes – In lowest areas of the concrete, drill 1” holes in concrete (on 12” centers) and fill holes with ¼” chip (ASTM No. 8)
  4. Base drainage - the area below the concrete must not be subject to frost movement
  5. Surface - surface must be totally smooth and flat equivalent to the desired finished surface
  6. Waterproofing - may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface.
  7. Jointing Sand - Use an impervious polymeric sand when installing over concrete

Jointing Material and Joint Stabilization 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements.

Handling – Exercise caution when handling this product, as contact between its zero-bevel edges may cause damage. Larger units should be placed mechanically with a vacuum lifter.

Edge Restraint - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 Sealers 

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

The Americans with Disabilities Act Accessibility Guidelines (ADAAG) provides measurable criteria to determine compliance, not individual product evaluation. Gaps, joints or openings, greater than ½” horizontal and ¼” vertical should be avoided as they can disrupt wheelchair maneuvering (United States Access Board – Guidelines and Standards).

Unit Thickness (mm)
Layers per Bundle
Units per Bundle
Units per Layer
Lbs per Bundle
Lbs per Layer
Lbs per Section
Lbs per Unit
COPING CHAMFERED
60
6
24
4
1,509.74
251.62
754.87
62.91
COPING BULLNOSE
60
6
24
4
1,509.74
251.62
754.87
62.91

Knowledge
Center

Skip to content