You can return any time by using the sub-menu at the top of your screen.
TREO® SMOOTH
A smaller version of the Beacon Hill Smooth, Treo Smooth offers a smooth surface texture for a sleek, modern look with a comtemporary color palette.
TREO® SMOOTH
A smaller version of the Beacon Hill Smooth, Treo Smooth offers a smooth surface texture for a sleek, modern look with a comtemporary color palette.
TREO®SMOOTH
Treo Smooth has all the features and patterns of Beacon Hill Flagstone except on a smaller scale making it ideal for smalller patios, pool decks and walkways. Treo Smooth can also be used for a driveway application and can be used for both traditional and permeable projects..
Recommended Base Stabilization — one layer of DriveGrid™ stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.
Standard Base — Min. 6” - 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).
Standard Bedding Course — 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.
Alternative Permeable Base — Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)
Alternative Permeable Bedding Course — 1” thick of 1/4” clear open-graded chip stone — (ASTM No. 8) screeded over base.
Special Note: Concrete Direct Overlay — In some areas of the country and in some applications pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:
Jointing Material and Joint Stabilization
All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.
Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)
Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer's application specifications and requirements.
Handling — This product has no special handling requirements.
Edge Restraint — Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.
Paver Compaction— Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.
Cleaners — Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer's diluton rates and application procedures. Always test a small area to make sure the results are as expected.
Sealers
Sq Ft per Bundle | Sq Ft per Layer | Layers per Bundle | Lin Ft per Sq.Ft. - Sailor | Lin Ft per Bundle - Sailor | Units per Sq Ft | Units per Bundle | Units per Layer | Lbs per Layer | Lbs per Bundle | Lbs per Unit | Lin Ft per Layer - Sailor | Sq Ft per Unit |
---|---|
Random Bundle | |
Sq Ft per Bundle | 93.50 |
Sq Ft per Layer | 11.69 |
Layers per Bundle | 8 |
Lin Ft per Sq.Ft. - Sailor | 1.57 |
Lin Ft per Bundle - Sailor | 146.77 |
Units per Sq Ft | 1.80 |
Units per Bundle | 168 |
Units per Layer | 21 |
Lbs per Layer | 427.62 |
Lbs per Bundle | 3,421.00 |
Lbs per Unit | 20.36 |
Lin Ft per Layer - Sailor | 18.35 |
Sq Ft per Unit | 0.56 |
We have received your inquiry