You can return any time by using the sub-menu at the top of your screen.
EN
SORENO™
SORENO™
Soreno has a sleek, modern look with a fine stone structure that discretely highlights the natural character in every slab. The flamed-like texture is achieved with fine-grained, natural stone grit for a surefooted surface that is smooth and elegant in appearance. Factory sealed with EasyClean™, these large format slabs offer stain-resistance, with integral surface protection that allows for easier cleanup of spills when they happen, before a stain can develop. With tight dimensional tolerances, these slabs are on-trend with today’s designs.
SORENO™
Soreno has a sleek, modern look with a fine stone structure that discretely highlights the natural character in every slab. The flamed-like texture is achieved with fine-grained, natural stone grit for a surefooted surface that is smooth and elegant in appearance. Factory sealed with EasyClean™, these large format slabs offer stain-resistance, with integral surface protection that allows for easier cleanup of spills when they happen, before a stain can develop. With tight dimensional tolerances, these slabs are on-trend with today’s designs.
Colors
Applications
Patio & Walkway
Shape and size
16"X32"
407mm x 815mm x 50mm
16" x 32" x 2"
407mm x 815mm x 50mm
16" x 32" x 2"
16"X32"
407mm x 815mm x 50mm
16" x 32" x 2"
407mm x 815mm x 50mm
16" x 32" x 2"
Technologies
Technologies
The refined surface of Unilock EnduraColor products is achieved with a two step manufacturing process that combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. This process protects the surface from the appearance of fading over time because the top layer prevents large, lighter color aggregates from ever showing through.
EasyClean ™
Unlike after-market sealers which merely coat the top, EasyClean goes beyond the surface and becomes integral to the product during manufacturing. The result is enhanced surface color and protection from stains.
A special finishing process creates Unilock Comfort Step, an ultra-smooth and silky surface texture that feels three times better on bare feet than traditional pavers*. These pavers feature a remarkably tight surface appearance, creating a unique sensory experience that is velvety-smooth. *based on consumer research
Colors
Pick a color
TOSCANA BEIGE
LIGHT GRANITE
Information
SORENO™
Recommended Base Stabilization – one layer of DriveGrid™" stabilization grid (or as specified by engineer) between subgrade and base material. Use under Standard Base Gravel or Permeable Base Gravel. Recommended depth 8” to 10” below pavers for maximum stability and performance OR as specified by project engineer.
Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).
Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.
Alternative Permeable Base – Min. 6” – 8” of ¾“ clear (ASTM No. 57) open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)
Alternative Permeable Bedding Course – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8 or 9) screeded over base.
Jointing Materials
All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.
Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)
Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements. Only use polymeric if specified by project engineer.
Handling – This product has zero bevel edges so handle carefully to prevent edge chipping.
Edge Restraint - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.
Paver Compaction - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction. No compaction is required if installed on roof deck pedestals.
Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.
Sealers
- Product may be sealed for aesthetic or cleanliness reasons but it is not required
- Use any sealer approved for concrete pavers
- Select type for desired aesthetics
- Product must be cleaned before sealing
- Always read and follow manufacturer’s application procedures
- Always test a small area to make sure the results are as expected
The Americans with Disabilities Act Accessibility Guidelines (ADAAG) provides measurable criteria to determine compliance, not individual product evaluation. Gaps, joints or openings, greater than ½” horizontal and ¼” vertical should be avoided as they can disrupt wheelchair maneuvering (United States Access Board – Guidelines and Standards).
Unit Thickness (mm)
Layers per Bundle
Sq Ft per Bundle
Sq Ft per Layer
Sq Ft per Unit
Units per Bundle
Units per Layer
Lin Ft per Bundle - Soldier
Lin Ft per Layer - Soldier
Lin Ft per Unit - Soldier
Lin Ft per Bundle - Sailor
Lin Ft per Layer - Sailor
Lin Ft per Unit - Sailor
Lbs per Bundle
Lbs per Layer
Lbs per Unit
16"X32"
50
18
64.27
3.57
3.57
18
1
24.04
1.34
1.34
48.13
2.67
2.67
1,549
86.06
86.06
