fbpx SIENASTONE® Walls and Verticals | Unilock New York

We’re Hiring! Start your career at Unilock and join our growing team.

SIENASTONE

Bold and dramatic, this large scale wall block (smallest unit weighs 380lbs each) strikes an impressive profile when used for a heavy-duty retaining wall or as treads in large outdoor staircases. The long lines and split face of SienaStone makes it an attractive alternative to more utilitarian-looking wall blocks. Build gravity walls up to 10ft (3m) or grid reinforced walls up to 40ft (12m) high with proper engineering under typical conditions. Coping units are also available.

-
-

SIENASTONE

Bold and dramatic, this large scale wall block (smallest unit weighs 380lbs each) strikes an impressive profile when used for a heavy-duty retaining wall or as treads in large outdoor staircases. The long lines and split face of SienaStone makes it an attractive alternative to more utilitarian-looking wall blocks. Build gravity walls up to 10ft (3m) or grid reinforced walls up to 40ft (12m) high with proper engineering under typical conditions. Coping units are also available.

Colors
Applications
Step
Shape and size
img
CLOSED-END COPING
1,200mm x 185mm x 500mm
47 1/4" x 7 3/8" x 19 3/4"
img
COPING
1,000mm x 185mm x 500mm
39 3/8" x 7 3/8" x 19 3/4"
img
COPING
1,000mm x 185mm x 500mm
39 3/8" x 7 3/8" x 19 3/4"

Product Gallery

Unilock SienaStone exposed agregate wall and steps
Unilock SienaStone exposed agregate linear plank wall
Unilock SienaStone exposed agregate linear plank wall
Technologies
Technologies
Classic
img

Classic

Our budget-friendly, Unilock Classic pavers and walls are manufactured to exceed ASTM standards for quality and strength. Available in classic shapes and styles, these products utilize a traditional product mix of large and small aggregates that is consistent from top to bottom with color mixed throughout.

Our technologies
Colors
GRANITE
SIERRA
Pick a color
GRANITE
SIERRA
Information
Information
Packaging
Downloads

SienaStone

SienaStone is an engineered large module (min 500 lbs/250 kg ea.) retaining wall system with incredible capacities for both gravity walls and reinforced walls. SienaStone is mostly used in commercial applications or in residential applications where higher and stronger structural walls must be constructed.

Applications – Structural retaining walls for large embankments.

Capacity – Gravity walls up to 13’ (4m). Geogrid reinforced walls up to 39 ft. (12m).

Recommended Base Stabilization – one layer of DriveGrid stabilization grid between subgrade and base material. Use under Standard Base or Permeable Base.

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Leveling – Install SienaStone directly on a compacted granular base. Install level end to end as well as front to back. Poured concrete leveling pads, reinforced with rebar, are also a great way to accomplish leveling, especially for larger installations. You must ensure that the concrete is poured and finished perfectly in order to achieve a good visual appearance.

Connection – features a tongue and groove connection. Use appropriate concrete adhesive for connection between units where the key has been removed or for corners. Always read adhesive manufacturers’ directions prior to gluing.

Handling – This is a mechanically placed wall system. Special clamps for lifting are available for use during project.

Coping - This wall requires the SienaStone specific coping. Coping attaches with tongue and groove connection. No adhesive required.

Layers per BundlePer Bundle SectionLin Ft per Bundle - SailorUnits Per SectionUnits per BundleUnits per LayerUnits per FcFtLbs per LayerLbs Per SectionLbs per BundleLbs per UnitLin Ft per Layer - SailorFcFt per LayerFcFt per BundleFcFt per Unit
COPINGCLOSED-END COPING
Layers per Bundle33
Per Bundle Section23
Lin Ft per Bundle - Sailor19.5023.70
Units Per Section32
Units per Bundle66
Units per Layer22
Units per FcFt0.500.42
Lbs per Layer926.671140
Lbs Per Section1,390.001140
Lbs per Bundle2,780.003420
Lbs per Unit463.33570
Lin Ft per Layer - Sailor6.507.90
FcFt per Layer44.81
FcFt per Bundle1214.43
FcFt per Unit22.41

Knowledge
Center

Skip to content