fbpx HOLLANDSTONE™ Pavers | Unilock Ontario

HOLLANDSTONE™

Hollandstone is a classic rectangular shape available in a range of colors for economical patios, walkways, driveways and commercial projects. Simple laying patterns and ease of installation contribute to its widespread appeal.

-
-

HOLLANDSTONE™

Hollandstone is a classic rectangular shape available in a range of colors for economical patios, walkways, driveways and commercial projects. Simple laying patterns and ease of installation contribute to its widespread appeal.

Colors
Applications
Borders and Accents
Pedestrian
Residential Vehicular
Shape and size
img
4"X8"
100mm x 200mm x 60mm
3 7/8" x 7 7/8" x 2 3/8"
img
4"X8"
100mm x 200mm x 60mm
3 7/8" x 7 7/8" x 2 3/8"
img
4"X8"
100mm x 200mm x 60mm
3 7/8" x 7 7/8" x 2 3/8"
img
4"X8"
100mm x 200mm x 60mm
3 7/8" x 7 7/8" x 2 3/8"
img
4"X8"
100mm x 200mm x 60mm
3 7/8" x 7 7/8" x 2 3/8"
img
4"X8"
100mm x 200mm x 60mm
3 7/8" x 7 7/8" x 2 3/8"

Product Gallery

Technologies
Technologies
Classic

Classic

Our budget-friendly, Unilock Classic pavers and walls are manufactured to exceed ASTM standards for quality and strength. Available in classic shapes and styles, these products utilize a traditional product mix of large and small aggregates that is consistent from top to bottom with color mixed throughout.

Our technologies
Colors
RUSTIC RED
GRANITE
SIERRA
NATURAL
DARK CHARCOAL
TERRA COTTA
Pick a color
RUSTIC RED
GRANITE
SIERRA
NATURAL
DARK CHARCOAL
TERRA COTTA
img
Jointing
Jointing
Laying Patterns

DETAIL MATTERS

The color of jointing sand you choose can have an impact on the overall look and feel of your paver patio, driveway or pool deck. Experiment with different options here.

Black Sand
Grey Sand
Tan Sand
Information
Information
Packaging

HOLLANDSTONE™

Hollandstone is a very popular value paver. The simple lines and patterns make it easy to work with. Add a special look to Hollandstone by incorporating Unigranite® or Series™ banding and insets.

Recommended Base Stabilization – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Alternative Permeable Bedding Course – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

Special Note: Concrete Direct Overlay – In some areas of the country and in some applications pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:

  1. Concrete integrity – concrete must be in good condition, and not crumbling
  2. Drainage slope – concrete below must be sloped away from all buildings and structures
  3. Drainage holes – In lowest areas of the concrete, drill 1” holes in concrete (on 12” centers) and fill holes with ¼” chip (ASTM No. 8)
  4. Base drainage - the area below the concrete must not be subject to frost movement
  5. Surface - surface must be totally smooth and flat equivalent to the desired finished surface
  6. Waterproofing - may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface.
  7. Jointing Sand - Use an impervious polymeric sand when installing over concrete

Jointing Material and Joint Stabilization 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements.

Handling – This product has no special handling requirements.

Edge Restraint - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 Sealers 

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected
SqFt Per BundleSqFt Per LayerSqFt Per SectionPer Bundle LayerPer Bundle SectionSoldier LnFt Per SqFtSoldier LnFt Per SectionSoldier LnFt Per BundleSailor LnFt Per SqFtSailor LnFt Per SectionSailor LnFt Per BundleUnits Per SqFtUnits Per SectionUnits Per BundleUnits per LayerLbs Per LayerLbs Per SectionLbs Per BundleLbs Per UnitSoldier Lnft per LayerSoldier Lnft per UnitSailor Lnft per LayerSQFT per Unit
4"X8"
SqFt Per Bundle109.26
SqFt Per Layer10.93
SqFt Per Section21.85
Per Bundle Layer10
Per Bundle Section5
Soldier LnFt Per SqFt1.50
Soldier LnFt Per Section32.80
Soldier LnFt Per Bundle164
Sailor LnFt Per SqFt3.00
Sailor LnFt Per Section65.62
Sailor LnFt Per Bundle328.08
Units Per SqFt4.58
Units Per Section100
Units Per Bundle500
Units per Layer50
Lbs Per Layer299.92
Lbs Per Section599.84
Lbs Per Bundle2,999.19
Lbs Per Unit6.00
Soldier Lnft per Layer16.40
Soldier Lnft per Unit0.33
Sailor Lnft per Layer32.81
SQFT per Unit0.22

Knowledge
Center