You can return any time by using the sub-menu at the top of your screen.
en
FULLNOSE EDGER™
FULLNOSE EDGER
Fullnose coping has been a popular choice for decades, used anywhere that a hard edge or corner is not ideal. Its smooth rounded edge is well suited for pool edges, steps, walls, firepits and other vertical features. Available in a wide range of colors to coordinate with most Unilock paver and wall products.
FULLNOSE EDGER
Fullnose coping has been a popular choice for decades, used anywhere that a hard edge or corner is not ideal. Its smooth rounded edge is well suited for pool edges, steps, walls, firepits and other vertical features. Available in a wide range of colors to coordinate with most Unilock paver and wall products.
Colors
Shape and size
STANDARD
152.4mm x 60mm x 304.8mm
6" x 2 3/8" x 12"
152.4mm x 60mm x 304.8mm
6" x 2 3/8" x 12"
Special order
STANDARD
150mm x 300mm x 70mm
5 7/8" x 11 7/8" x 2 3/4"
150mm x 300mm x 70mm
5 7/8" x 11 7/8" x 2 3/4"
Technologies
Technologies
Ultima ™
Only Unilock has the technology to manufacture Ultima Concrete here in North America, resulting in pavers and walls with up to four times the strength of poured concrete. The look you purchase is the look that will last.
Classic
Our budget-friendly, Unilock Classic pavers and walls are manufactured to exceed as ASTM standards for quality and strength. Available in classic shapes and styles, these products utilize a traditional product mix of large and small aggregates, that is consistent from top to bottom, with color mixed throughout.
Colors
Pick a color
SIERRA
SANDSTONE
Information
Fullnose Edger™
When a hard edge or corner is not appropriate in your landscape plan, this paving stone is the perfect solution. With its smooth, rounded exposed edge, it’s ideal for pool edges, the front of steps and as edging around areas like driveways and walkways.
Applications – Coping for steps, pool edges, planters and walls. Units are designed for straight applications but radius applications can be achieved by cutting tapered units.
Connection – non-mechanical connection. Use appropriate concrete adhesive for connection between units. Install with tight joints or 3/16” gap between units and amend with an exterior latex caulking. Cutting may be required; a diamond blade saw is required to cut coping properly. Glue all coping using a specially formulated concrete adhesive that is strong and will not break down over time. Always read adhesive manufacturers’ directions prior to gluing.
Handling – Handle un-tumbled versions of this coping gently to avoid chipping edges.
Unit Thickness (mm)
Layers per Bundle
Lbs per Bundle
Lbs per Layer
Lbs per Section
Lbs per Unit
STANDARD
60
4
2,790.67
697.67
697.67
13.42
STANDARD
70
4
2,376.19
594.05
594.05
14.85
