Old world charm. New age technology.
Reminiscent of the brick pavers used in old European cities, towns and villages, Copthorne is a virtually indestructible paver that will not split, crack or fade. Crafted using a special forming process, each piece is uniquely altered, yet the dimensions are consistent for easy, efficient installation.
EnduraColor Plus Architectural Finishes promise long-lasting beauty through a proprietary blend of exclusive and superior ingredients. A complex blend of granite and quartz, some of nature’s highest performing minerals, are combined with color pigments that are highly resistant to fading under UV light and extreme weather conditions. This combination is used to create ultra-realistic surface textures and unique style options that are exceptionally durable. A NEW STANDARD FOR EVERLASTING BEAUTY.
Burgundy Red / Burnt Clay / Old Oak
Blended on site
Shapes & Sizes
20 cm x 6.5 cm x 6 cm
7.75" x 2.5" x 2.25"
Jointing Compound - Small detail, Big difference
To add the finishing touches on your project experiment with the different sand options below. Different sand colors can have a significant impact on the overall look and feel of your paver patio, driveway or pool deck. Experiment with the different sand color options below for Antara. By clicking the different sand colors the joints will change in the image on the left. Click the image to see a larger version
Learn About Copthorne
Copthorne Torture Test
Borders & AccentsPedestrianResidential Vehicular
EnduraColor Facemix TechnologyEnduraColor products are manufactured in a two-step process which combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. EnduraColor products are highly resistant to fading because the top layer prevents large, lighter color aggregates from showing through. Reala™ Surface TechnologyUltra-realistic textures cast from actual natural stone, brick and cobblestones.Ultima™ Concrete TechnologyFor heavy traffic loads, this proprietary manufacturing process creates pavers and walls with up to 4 times the strength of poured concrete.
|Unit Thickness||Sq. Ft. Bndl.||Sq. Ft. Layer||Layers Bndl.||Ln Ft Sec. Soldier||Ln Ft Bndl. Soldier||Sq Ft Ln Ft Soldier||Ln Ft Sec. Sailor||Ln Ft Bndl. Sailor||Sq Ft Ln Ft Sailor||Units Sq. Ft.||Lbs Bndl.||Lbs Sec.||Units Bndl.|
|Standard - Full Bundle||6||89.20||11.15||-||8||-||127.9||-||-||-||-||6.73||2349||294||600|
|Standard - Half Bundle||6||44.60||11.15||-||4||-||64||-||-||-||-||6.73||1174||294||300|
Copthorne® Old Oak, Burgundy Red, Burnt Clay
Sold Separately/Blended on Site
Additional Copthorne® Information
Sold in full bundles only on a refundable skid (except specific areas of NY where half bundles are also available). Important: Textured surfaces require a buffer between the plate compactor and the paver surface to prevent scuffing.Take extra care when using Polymeric Sand with this product. Contact Unilock for information.
The surface of each Copthorne paver is uniquely cast using Reala Surface technology to capture the feel of Europe’s oldest brick streets. Made with Ultima concrete, you not only get that bygone look and feel, with the assurance that Copthorne can be used inthe most demanding of applications.
Base Requirement & Bedding Course – standard paver base specification
Handling & Installation – A protective pad is required when doing the final paver compaction. Be sure to offset joints forbest appearance. Cutting is seldom required if you are installing a curvilinear walkway. Minimum radius 6 feet for curvedapplications. Install from multiple pallets for best color distribution.
- all paver applications and as accents in walls
Jointing Material and Joint Stabilization
Good: Ordinary dry joint sand
- Better: Unicare Polymeric Sand, Techniseal RG+, Alliance XP
- Best: Ordinary dry joint sand stabilized by a water-based or solvent based joint sand stabilizer (joint sand stabilizersealer may make the surface slightly slippery).
o Polymeric sand is often installed too high in the joint. Ensure the sand level is lower than the paver surface to allowfor a three dimensional appearance.
o Alliance Gator Maxx Polymeric Sand is recommended for concrete overlays.
- Product may be sealed but it is not absolutely required
- Sealers generally decrease the slip resistance of a product
- Unilock Unicare, Surebond, BP Pro and Techniseal sealers can be used.
- Semi-gloss sealers will still appear glossy on this product. Please test a stone to ensure the desired effect.
- Product must be cleaned before sealing
Cleaners – Any paver cleaner from Unilock, Techniseal, Surebond or BP- Pro is acceptable.
Special note: Other than overlay on concrete stoops and steps, you should have a bedding layer between the pavers and the poured concrete surface to avoid issues with height variance
Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!