fbpx OPTILOC® Pavers | Unilock Ontario
EN

OPTILOC

Optiloc is a high performance, heavy duty industrial paver that is one of the best solutions for vehicular pavements. Possessing the same L-shaped, tri-axis locking principle as world renowned Anchorlock, Optiloc offers a sleeker, rectilinear look, which can also be laid mechanically. For large scale commercial projects, special order colors and textures are available.

Optiloc Standard Unit
-
Optiloc Standard Unit
-

OPTILOC

Optiloc is a high performance, heavy duty industrial paver that is one of the best solutions for vehicular pavements. Possessing the same L-shaped, tri-axis locking principle as world renowned Anchorlock, Optiloc offers a sleeker, rectilinear look, which can also be laid mechanically. For large scale commercial projects, special order colors and textures are available.

Colors
Applications
Heavy Dutty Vehicular e1632317142118
Commercial Vehicular
Heavy Duty Vehicular
Light Duty Vehicular
Pedestrian e1632317129849
Residential & Commercial Pedestrian
Roadways Streets e1632317106171
Residential Driveway
Shape and size
Special order
img
STANDARD
260mm x 260mm x 80mm
10 1/4" x 10 1/4" x 3 1/8"
Technologies
Technologies
Classic
img

Classic

Our budget-friendly, Unilock Classic pavers and walls are manufactured to exceed as ASTM standards for quality and strength. Available in classic shapes and styles, these products utilize a traditional product mix of large and small aggregates, that is consistent from top to bottom, with color mixed throughout.

Our technologies
Colors
NATURAL
Pick a color
NATURAL
img
Information
Information
Packaging

Optiloc™

Optiloc is one of the best pavers to use for roads, commercial parking lots and loading ramps. The dual-axis properties of this shape make it an extremely strong surface designed for prolonged heavy vehicular use.

Recommended Base Stabilization – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base. (This is a standard is typical, but most commercial applications will have site specific engineering provided by an engineer.)

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.) (This is a standard is typical, but most commercial applications will have site specific engineering provided by an engineer.)

Alternative Permeable Bedding Course – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

Jointing Material and Joint Stabilization 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand) Type is generally specified by the site engineer.

Handling – This product has no special handling requirements.

Edge Restraint - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 Sealers 

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

The Americans with Disabilities Act Accessibility Guidelines (ADAAG) provides measurable criteria to determine compliance, not individual product evaluation. Gaps, joints or openings, greater than ½” horizontal and ¼” vertical should be avoided as they can disrupt wheelchair maneuvering (United States Access Board – Guidelines and Standards).

Unit Thickness (mm)
Layers per Bundle
Sq Ft per Bundle
Sq Ft per Layer
Sq Ft per Unit
Units per Bundle
Units per Layer
Lbs per Bundle
Lbs per Layer
Lbs per Unit
STANDARD
80
8
93.14
11.64
0.61
152
19
3,408.92
426.12
22.43

Knowledge
Center

Skip to content