fbpx TRANSITION™ Pavers | Unilock Boston

TRANSITION

Enduracolor technology brings a refined surface and long-lasting color to the basic shapes of Transition™. Available in a wide variety of subtle color blends, Transition is an economical choice for driveways, patios and walkways. Combining the small rectangle and square can achieve a more random look, or the units can be used individually to create a simpler pattern.

-
-

TRANSITION

Enduracolor technology brings a refined surface and long-lasting color to the basic shapes of Transition™. Available in a wide variety of subtle color blends, Transition is an economical choice for driveways, patios and walkways. Combining the small rectangle and square can achieve a more random look, or the units can be used individually to create a simpler pattern.

Colors
Applications
Borders and Accents
Commercial Vehicular
Pedestrian
Residential Vehicular
Shape and size
img
RECTANGLE
150mm x 230mm x 60mm
5 7/8" x 9" x 2 3/8"
img
RECTANGLE
150mm x 230mm x 60mm
5 7/8" x 9" x 2 3/8"
img
RECTANGLE
150mm x 230mm x 60mm
5 7/8" x 9" x 2 3/8"
img
RECTANGLE
150mm x 230mm x 60mm
5 7/8" x 9" x 2 3/8"
img
RECTANGLE
150mm x 230mm x 60mm
5 7/8" x 9" x 2 3/8"
img
RECTANGLE
150mm x 230mm x 60mm
5 7/8" x 9" x 2 3/8"
img
RECTANGLE
150mm x 230mm x 60mm
5 7/8" x 9" x 2 3/8"
img
RECTANGLE
150mm x 230mm x 60mm
5 7/8" x 9" x 2 3/8"
img
SQUARE
150mm x 150mm x 60mm
5 7/8" x 5 7/8" x 2 3/8"
img
SQUARE
150mm x 150mm x 60mm
5 7/8" x 5 7/8" x 2 3/8"
img
SQUARE
150mm x 150mm x 60mm
5 7/8" x 5 7/8" x 2 3/8"
img
SQUARE
150mm x 150mm x 60mm
5 7/8" x 5 7/8" x 2 3/8"
img
SQUARE
150mm x 150mm x 60mm
5 7/8" x 5 7/8" x 2 3/8"
img
SQUARE
150mm x 150mm x 60mm
5 7/8" x 5 7/8" x 2 3/8"

Product Gallery

Technologies
Technologies
EnduraColor
img
img

The refined surface of Unilock EnduraColor products is achieved with a two step manufacturing process that combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. This process protects the surface from the appearance of fading over time because the top layer prevents large, lighter color aggregates from ever showing through.

Our technologies
Colors
FOSSIL
TUSCANY
STEEL MOUNTAIN
NEW YORK BLEND
SIERRA
BROWN
ALMOND GROVE
CHARCOAL
Pick a color
FOSSIL
TUSCANY
STEEL MOUNTAIN
NEW YORK BLEND
SIERRA
BROWN
ALMOND GROVE
CHARCOAL
Information
Information
Packaging
Downloads

TRANSITION PAVER

 

For those looking for a smaller format paver that has the same randomness as Beacon Hill Flagstone, Transition Paver delivers that same look and feel at a smaller scale.

Recommended Base Stabilization – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Alternative Permeable Bedding Course – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

Special Note: Concrete Direct Overlay – In some areas of the country and in some applications pavers are very successfully placed directly over concrete.  Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:

  1. Concrete integrity – concrete must be in good condition, and not crumbling
  2. Drainage slope – concrete below must be sloped away from all buildings and structures
  3. Drainage holes – In lowest areas of the concrete, drill 1” holes in concrete (on 12” centers) and fill holes with ¼” chip (ASTM No. 8)
  4. Base drainage - the area below the concrete must not be subject to frost movement
  5. Surface - surface must be totally smooth and flat equivalent to the desired finished surface
  6. Waterproofing - may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface.
  7. Jointing Sand -  Use an impervious polymeric sand when installing over concrete

Jointing Material and Joint Stabilization 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements.

              

Handling – Do not knock units together while transporting or installing. Doing so could chip edges or corners.

Edge Restraint - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 Sealers 

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Selecttype for desired aesthetics
  • Productmust be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

 

Sq Ft per BundleSq Ft per LayerSqFt Per SectionLayers per BundlePer Bundle SectionLin Ft per Sq.Ft. - SoldierSoldier LnFt Per SectionLin Ft per Bundle - SoldierLin Ft per Sq.Ft. - SailorSailor LnFt Per SectionLin Ft per Bundle - SailorUnits per Sq FtUnits Per SectionUnits per BundleUnits per LayerLbs per LayerLbs Per SectionLbs per BundleLbs per UnitLin Ft per Layer - SoldierLin Ft per Unit - SoldierLin Ft per Layer - SailorSq Ft per Unit
SQUARERECTANGLE
Sq Ft per Bundle116112.50
Sq Ft per Layer11.6012.50
SqFt Per Section11.6012.50
Layers per Bundle109
Per Bundle Section109
Lin Ft per Sq.Ft. - Soldier1.781.18
Soldier LnFt Per Section20.6714.76
Lin Ft per Bundle - Soldier206.69132.87
Lin Ft per Sq.Ft. - Sailor1.781.81
Sailor LnFt Per Section20.6722.64
Lin Ft per Bundle - Sailor206.69203.74
Units per Sq Ft3.622.40
Units Per Section4230
Units per Bundle420270
Units per Layer4230
Lbs per Layer324.70350
Lbs Per Section324.70350
Lbs per Bundle3,246.963150
Lbs per Unit7.7311.67
Lin Ft per Layer - Soldier20.6714.76
Lin Ft per Unit - Soldier0.490.49
Lin Ft per Layer - Sailor20.6722.64
Sq Ft per Unit0.280.42

Knowledge
Center