SKYLINE™ Pavers Michigan | Unilock

Bitmap We’re Hiring! Start your career at Unilock and join our growing team.

en

SKYLINE

The 24” square size of Skyline is ideal for roof decks, walkways, patios or pool decks. Skyline is available in a Classic thru-mix finish, or you can upgrade to Enduracolor for a more refined surface and long-lasting color. Skyline slabs can be further enhanced by adding EasyClean®, an integral surface protection from stains

Skyline 606x606x50 Chamois
-
Skyline 606x606x50 Chamois
-

SKYLINE

The 24” square size of Skyline is ideal for roof decks, walkways, patios or pool decks. Skyline is available in a Classic thru-mix finish, or you can upgrade to Enduracolor for a more refined surface and long-lasting color. Skyline slabs can be further enhanced by adding EasyClean®, an integral surface protection from stains

Colors
Applications
Borders Accents e1632317158754
Borders and Accents
Pedestal or Overlay
Pedestrian e1632317129849
Residential Pedestrian
Shape and size
Special order
img
24"X24"
606mm x 606mm x 50mm
23 7/8" x 23 7/8" x 2"
Technologies
Technologies
EnduraColor
img
img

The refined surface of Unilock EnduraColor products is achieved with a two step manufacturing process that combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. This process protects the surface from the appearance of fading over time because the top layer prevents large, lighter color aggregates from ever showing through.

Our technologies
Colors
CHAMOIS
Pick a color
CHAMOIS
img
Information
Information
Packaging
Downloads

Skyline

Standard Base (non-roof deck applications)– Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course (non-roof deck applications) – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base (non-roof deck applications)– Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Alternative Permeable Bedding Course (non-roof deck applications) – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

Roof deck - direct over concrete installation or pedestal installation – Refer to site and/or building engineering specifications.

Jointing Material and Joint Stabilization (non-roof deck applications) 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements.

Handling – This product should be placed with a vacuum lifting device. To prevent chipping, do not bump edges against each other.

Edge Restraint (non-roof deck applications) - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction (non-roof deck applications) - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 Sealers 

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

The Americans with Disabilities Act Accessibility Guidelines (ADAAG) provides measurable criteria to determine compliance, not individual product evaluation. Gaps, joints or openings, greater than ½” horizontal and ¼” vertical should be avoided as they can disrupt wheelchair maneuvering (United States Access Board – Guidelines and Standards).

Sq Ft per BundleSq Ft per LayerLayers per BundleLin Ft per Sq.Ft. - SoldierLin Ft per Bundle - SoldierLin Ft per Sq.Ft. - SailorLin Ft per Bundle - SailorUnits per Sq FtUnits per BundleUnits per LayerLbs per LayerLbs per BundleLbs per UnitLin Ft per Layer - SoldierLin Ft per Unit - SoldierLin Ft per Layer - SailorSq Ft per Unit
24"X24"
Sq Ft per Bundle80
Sq Ft per Layer8
Layers per Bundle10
Lin Ft per Sq.Ft. - Soldier0.50
Lin Ft per Bundle - Soldier40
Lin Ft per Sq.Ft. - Sailor0.50
Lin Ft per Bundle - Sailor40
Units per Sq Ft0.25
Units per Bundle20
Units per Layer2
Lbs per Layer183.28
Lbs per Bundle1,832.80
Lbs per Unit91.64
Lin Ft per Layer - Soldier4
Lin Ft per Unit - Soldier2
Lin Ft per Layer - Sailor4
Sq Ft per Unit4

Knowledge
Center

Skip to content