fbpx PROMENADE PAVER™ | Unilock Chicago

Bitmap We’re Hiring! Start your career at Unilock and join our growing team.


The long, linear look of Promenade Paver will lend a sleek, contemporary look to your project. This plank style paver is a favorite of architects and designers. A variety of colors and finishes are available by special order for use alone or in combination for a truly custom look.



The long, linear look of Promenade Paver will lend a sleek, contemporary look to your project. This plank style paver is a favorite of architects and designers. A variety of colors and finishes are available by special order for use alone or in combination for a truly custom look.

Borders and Accents
Commercial Vehicular
Residential Driveway
Residential Pedestrian
Residential Vehicular
Shape and size
Special order
100mm x 300mm x 100mm
3 7/8" x 11 7/8" x 3 7/8"
Special order
100mm x 400mm x 100mm
3 7/8" x 15 3/4" x 3 7/8"
Special order
200mm x 600mm x 100mm
7 7/8" x 23 5/8" x 3 7/8"

Product Gallery

Unilock Promenade Paver linear plank contemporary driveway
Contemporary Unilock Promenade Paver brushed linear plank paver driveway and walkway
Contemporary Unilock Promenade Paver linear plank paver  outdoor living space with fire feature
Contemporary Unilock Promenade Paver linear plank brushed paver patio
Unilock Promenade Paver linear plank walkway
EasyClean ™
ColorFusion ™

The refined surface of Unilock EnduraColor products is achieved with a two step manufacturing process that combines a base of coarser aggregates for a stronger foundation, with concentrated color and wear-resistant finer aggregates on top. This process protects the surface from the appearance of fading over time because the top layer prevents large, lighter color aggregates from ever showing through

Our technologies

EasyClean ™

Unlike after-market sealers which merely coat the top, EasyClean goes beyond the surface and becomes integral to the product during manufacturing. The result is enhanced surface color and protection from stains.

Our technologies

ColorFusion ™

Color and granite particles are randomly dispersed using proprietary ColorFusion technology to achieve a unique mottled surface that resembles natural granite.

Our technologies


Our budget-friendly, Unilock Classic pavers and walls are manufactured to exceed ASTM standards for quality and strength. Available in classic shapes and styles, these products utilize a traditional product mix of large and small aggregates that is consistent from top to bottom with color mixed throughout.

Our technologies
Pick a color


The color of jointing sand you choose can have an impact on the overall look and feel of your paver patio, driveway or pool deck. Experiment with different options here.

Black Sand
Grey Sand
Tan Sand


The Promenade system makes it ideal for giving your project that contemporary look.

Recommended Base Stabilization – one layer of DriveGrid™" stabilization grid between subgrade and base material. Recommended depth 8” to 10” below pavers for maximum stability and performance. Use under Standard Base or Permeable Base.

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Alternative Permeable Bedding Course – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8) screeded over base.

Special Note: Concrete Direct Overlay – In some areas of the country and in some applications pavers are very successfully placed directly over concrete. Concrete as a base is in itself quite strong, but it can affect the structural integrity of the paver particularly in vehicular applications, where the concrete below is sub-par. The following considerations must be taken into account to insure that the concrete below the surface is ideal:

  1. Concrete integrity – concrete must be in good condition, and not crumbling
  2. Drainage slope – concrete below must be sloped away from all buildings and structures
  3. Drainage holes – In lowest areas of the concrete, drill 1” holes in concrete (on 12” centers) and fill holes with ¼” chip (ASTM No. 8)
  4. Base drainage - the area below the concrete must not be subject to frost movement
  5. Surface - surface must be totally smooth and flat equivalent to the desired finished surface
  6. Waterproofing - may be required when installing pavers over concrete where there is a basement or cold cellar below. Install an impervious rubber membrane over the surface prior to installing any pavers over the surface.
  7. Jointing Sand - Use an impervious polymeric sand when installing over concrete

Jointing Material and Joint Stabilization 

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance,, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements.

Handling – This product has no special handling requirements.

Edge Restraint - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.


  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected
Sq Ft per BundleSq Ft per LayerLayers per BundleLin Ft per Sq.Ft. - SoldierLin Ft per Bundle - SoldierLin Ft per Sq.Ft. - SailorLin Ft per Bundle - SailorUnits per Sq FtUnits per BundleUnits per LayerLbs per LayerLbs per BundleLbs per UnitLin Ft per Layer - SoldierLin Ft per Unit - SoldierLin Ft per Layer - SailorSq Ft per Unit
Sq Ft per Bundle46.5051.6751.6758.13
Sq Ft per Layer11.6310.3310.3311.63
Layers per Bundle4555
Lin Ft per Sq.Ft. - Soldier0.510.760.511.02
Lin Ft per Bundle - Soldier23.6239.3726.2559.06
Lin Ft per Sq.Ft. - Sailor2.033.051.523.05
Lin Ft per Bundle - Sailor94.49157.4878.74177.17
Units per Sq Ft1.032.320.773.10
Units per Bundle4812040180
Units per Layer1224836
Lbs per Layer797.97469.00488531.77
Lbs per Bundle3,191.882,345.002,440.002,658.87
Lbs per Unit66.5019.546114.77
Lin Ft per Layer - Soldier5.917.875.2511.81
Lin Ft per Unit - Soldier0.490.330.660.33
Lin Ft per Layer - Sailor23.6231.5015.7535.43
Sq Ft per Unit0.970.431.290.32


Skip to content