fbpx ANCHORLOCK™ Pavers | Unilock Boston

ANCHORLOCK™

The unique L-shaped design of Anchorlock provides ultimate locking strength for heavy duty applications. Six locking sides and tri-axis engineering have made its performance over the past thirty years in high traffic applications recognized by paver specialists worldwide. As well, it is ideal for mechanical installation, making it an economical choice for large scale projects.

-
-

ANCHORLOCK™

The unique L-shaped design of Anchorlock provides ultimate locking strength for heavy duty applications. Six locking sides and tri-axis engineering have made its performance over the past thirty years in high traffic applications recognized by paver specialists worldwide. As well, it is ideal for mechanical installation, making it an economical choice for large scale projects.

Colors
Applications
Commercial Vehicular
Pedestrian
Residential Vehicular
Shape and size
Special order
img
STANDARD
225mm x 225mm x 80mm
8 7/8" x 8 7/8" x 3 1/8"
Technologies
Technologies
Classic
img

Classic

Our budget-friendly, Unilock Classic pavers and walls are manufactured to exceed ASTM standards for quality and strength. Available in classic shapes and styles, these products utilize a traditional product mix of large and small aggregates that is consistent from top to bottom with color mixed throughout.

Our technologies
Colors
NATURAL
Pick a color
NATURAL
Information
Information
Packaging

ANCHORLOCK™

 

Recommended Base Stabilization – one layer of DriveGrid™" stabilization grid (or as specified by engineer) between subgrade and base material. Use under Standard Base Gravel or Permeable Base Gravel. Recommended depth 8” to 10” below pavers for maximum stability and performance OR as specified by project engineer. 

Standard Base – Min. 6” – 8” of ¾” Crusher Run gravel (any road base standard in accordance with ASTM-D2940) compacted to 98% Standard Proctor Density (SPD).

Standard Bedding Course – 1” thick of coarse sand– in accordance with ASTM-D2940 screeded over base.

Alternative Permeable Base – Min. 6” – 8” of ¾“ clear (ASTM No. 57) open-graded stone compacted to achieve full particle lock-up and consolidation. (Clear open-graded does not compact but does consolidate slightly by rattling the particles together.)

Alternative Permeable Bedding Course – 1” thick of 1/4” clear open-graded chip stone – (ASTM No. 8 or 9) screeded over base.

 

Jointing Materials

All sands must meet ASTM C144 or C33 Specifications. For best appearance and optimal performance, keep jointing materials approximately 1/8” below the chamfer (bevel edge) of the paver.

Good Option: Ordinary sharp jointing sand in accordance with ASTM C144 or C33. (Common name: Concrete Sand)

Best Option: Any polymeric sand or ordinary concrete sand stabilized by a water-based or solvent-based joint sand stabilizer sealer. Always follow manufacturer’s application specifications and requirements. Only use polymeric if specified by project engineer.

           

Handling – This product has no special handling requirements.

Edge Restraint - Always install an edge restraint around the perimeter of any paver installation not restrained by building structures. Spike-in edge restraints come in plastic and metal and work well for most applications. A concrete curb or a sub-surface concrete wedge can also be installed to retain the edge.

Paver Compaction - Always use a protective polymer pad on the bottom of your compactor when doing the final compaction of the pavers. An alternative is to use a rubber-roller compactor for the final compaction.

Cleaners – Any cleaner specifically designed for pavers may be used for color restoration or general cleaning. Follow manufacturer’s dilution rates and application procedures. Always test a small area to make sure the results are as expected.

 Sealers

  • Product may be sealed for aesthetic or cleanliness reasons but it is not required
  • Use any sealer approved for concrete pavers
  • Select type for desired aesthetics
  • Product must be cleaned before sealing
  • Always read and follow manufacturer’s application procedures
  • Always test a small area to make sure the results are as expected

 

 

Sq Ft per BundleSq Ft per LayerSqFt Per SectionLayers per BundlePer Bundle SectionUnits per Sq FtUnits Per SectionUnits per BundleUnits per LayerLbs per LayerLbs Per SectionLbs per BundleLbs per UnitSq Ft per Unit
STANDARD
Sq Ft per Bundle78.80
Sq Ft per Layer11.26
SqFt Per Section11.26
Layers per Bundle7
Per Bundle Section7
Units per Sq Ft2.37
Units Per Section26.67
Units per Bundle186.69
Units per Layer26.67
Lbs per Layer419.56
Lbs Per Section419.56
Lbs per Bundle2,936.92
Lbs per Unit15.73
Sq Ft per Unit0.42

Knowledge
Center