Old world charm. New age technology.

Reminiscent of the brick pavers used in old European cities, towns and villages, Copthorne is a virtually indestructible paver that will not split, crack or fade. Crafted using a special forming process, each piece is uniquely altered, yet the dimensions are consistent for easy, efficient installation.

Why Choose

This product features EnduraColor™ Plus, a proprietary blended layer of nature’s highest performing minerals that never fade. It virtually outperforms any other paver surface when it comes to surface wear, color retention and its ability to repel even the nastiest staining substances. Choosing EnduraColor Plus, will ensure your patio, driveway, outdoor kitchen or pool deck will look like new, even after years of wear and tear.



Burgundy Red

Burnt Clay

Old Oak

Burgundy Red / Burnt Clay / Old Oak
Blended on site

Shapes & Sizes


20 cm x 6.5 cm x 6 cm

7.75" x 2.5" x 2.25"

Jointing Compound - Small detail, Big difference

To add the finishing touches on your project experiment with the different sand options below. Different sand colors can have a significant impact on the overall look and feel of your paver patio, driveway or pool deck. Experiment with the different sand color options below for Antara. By clicking the different sand colors the joints will change in the image on the left. Click the image to see a larger version
Black Sand
Tan Sand
Grey Sand

Learn About Copthorne

Copthorne Torture Test


Borders & Accents
Residential Vehicular
EnduraColor™ Plus
EnduraColor Plus is the defining difference when it comes to superior wear resistance and color longevity. EnduraColor Plus is not a coating or secondary treatment, but rather a proprietary blended layer of nature's highest performing minerals (which never fade) that have been embedded right into the surface of each stone during the manufacturing process. This ensures that the surface will not fade, crack, peel or delaminate, and the beauty of your project will last a lifetime.
Reala™ Surface Technology
Ultra-realistic textures cast from actual natural stone, brick and cobblestones.
Ultima™ Concrete Technology
For heavy traffic loads, this proprietary manufacturing process creates pavers and walls with up to 4 times the strength of poured concrete.
Surface Texture


Copthorne A

Standard (100%)


Pattern Sheet (.pdf)

.PAT (Imperial)

.PAT (Metric)

Copthorne B

Standard (100%)


Pattern Sheet (.pdf)

.PAT (Imperial)

.PAT (Metric)

Copthorne C

Standard (100%)


Pattern Sheet (.pdf)

.PAT (Imperial)

.PAT (Metric)

Copthorne D

Standard (100%)


Pattern Sheet (.pdf)

.PAT (Imperial)

.PAT (Metric)


Unit Thickness Sq. Ft. Bndl. Sq. Ft. Layer Layers Bndl. Ln Ft Sec. Soldier Ln Ft Bndl. Soldier Sq Ft Ln Ft Soldier Ln Ft Sec. Sailor Ln Ft Bndl. Sailor Sq Ft Ln Ft Sailor Units Sq. Ft. Lbs Bndl. Lbs Sec. Units Bndl.
Standard - Full Bundle689.2011.15-8-127.9----6.732349294600
Standard - Half Bundle644.6011.15-4-64----6.731174294300

Copthorne® Old Oak, Burgundy Red, Burnt Clay

Sold Separately/Blended on Site

Additional Copthorne® Information

Sold in full bundles only on a refundable skid (except specific areas of NY where half bundles are also available). Important: Textured surfaces require a buffer between the plate compactor and the paver surface to prevent scuffing.Take extra care when using Polymeric Sand with this product. Contact Unilock for information.

Important Information

 The surface of each Copthorne paver is uniquely cast using Reala Surface technology to capture the feel of Europe’s oldest brick streets. Made with Ultima concrete, you not only get that bygone look and feel, with the assurance that Copthorne can be used inthe most demanding of applications.

Base Requirement & Bedding Course – standard paver base specification

Handling & Installation – A protective pad is required when doing the final paver compaction. Be sure to offset joints forbest appearance. Cutting is seldom required if you are installing a curvilinear walkway. Minimum radius 6 feet for curvedapplications. Install from multiple pallets for best color distribution.

Accent compatibility


  • all paver applications and as accents in walls

 Jointing Material and Joint Stabilization

 Good: Ordinary dry joint sand

  • Better: Unicare Polymeric Sand, Techniseal RG+, Alliance XP
  • Best:   Ordinary dry joint sand stabilized by a water-based or solvent based joint sand stabilizer (joint sand stabilizersealer may make the surface slightly slippery).


o  Polymeric sand is often installed too high in the joint. Ensure the sand level is lower than the paver surface to allowfor a three dimensional appearance.

o  Alliance Gator Maxx Polymeric Sand is recommended for concrete overlays.


  • Product may be sealed but it is not absolutely required
  • Sealers generally decrease the slip resistance of a product
  • Unilock Unicare, Surebond, BP Pro and Techniseal sealers can be used.
  • Semi-gloss sealers will still appear glossy on this product. Please test a stone to ensure the desired effect.
  • Product must be cleaned before sealing

Cleaners – Any paver cleaner from Unilock, Techniseal, Surebond or BP- Pro is acceptable.

Special note: Other than overlay on concrete stoops and steps, you should have a bedding layer between the pavers and the poured concrete surface to avoid issues with height variance

Want help calculating your order?
Use our interactive paver calculator to get quick, easy and accurate specifications for your project!

Paver Calculator