The modern yet elegant look of Copthorne will add a touch of class to any landscaping project. With an average compressive strength rating of up to 4 times the strength of conventional poured concrete, Copthorne is a virtually indestructable paver that will not split, crack or fade.
20.0 x 6.5 x 6.0cm
7.8" x 2.5" x 2.3"
Copthorne features EnduraColor Plus, the defining difference when it comes to superior wear resistance and color longevity. EnduraColor Plus is a blended layer of nature's highest performing minerals (which never fade) that have been embedded right into the surface of each stone during the manufacturing process. This ensures that the surface will not fade, crack, peel or delaminate, and the beauty of your project will last a lifetime.
By integrating borders and accents with unique Unilock pavers you can easily complement your home’s exterior while reflecting your personal style. For great ideas with Copthorne, scroll through the design ideas featured on the right. Need more options? Create your own design combinations by clicking the button below!Create Your Own
Joint sand color can drastically change the entire look of your paver project. Perhaps you’d like to select a sand to complement the color of your vertical elements. To envision Copthorne with different sand options, select the sand colors on the right and see the larger image by clicking on the left.
EnduraColor Plus is the defining difference when it comes to superior wear resistance and color longevity. EnduraColor Plus is not a coating or secondary treatment, but rather a proprietary blended layer of nature's highest performing minerals (which never fade) that have been embedded right into the surface of each stone during the manufacturing process. This ensures that the surface will not fade, crack, peel or delaminate, and the beauty of your project will last a lifetime.
Ultra-realistic textures cast from actual natural stone, brick and cobblestones.
For heavy traffic loads, this proprietary manufacturing process creates pavers and walls with up to 4 times the strength of poured concrete.
|Sq. Ft. Bndl.||Sq. Ft. Unit||Sectn. Bndl.||Layers Bndl.||Ln. Ft. Unit (Sailor)||Sq. Ft. Ln. Ft. (Soldier)||Ln. Ft. Bndl. (Sailor)||Ln. Ft. Bndl. (Soldier)||Units Sq. Ft.||Units Ln. Ft.||Lbs. Bndl.||Units Bndl.|
|Standard Bundle (6cm)||89.20||0.15||-||-||-||-||-||134||6.73||-||2540||600|
Sold Separately/Blended on Site
Sold in full bundles only on a refundable skid. Important: Textured surfaces require a buffer between the plate compactor and the paver surface to prevent scuffing. Take extra care when using Polymeric Sand with this product. Contact Unilock for information.
The surface of each Copthorne paver is uniquely cast using Reala Surface technology to capture the feel of Europe’s oldest brick streets. Made with Ultima concrete, you not only get that bygone look and feel, with the assurance that Copthorne can be used in the most demanding of applications.
Base Requirement & Bedding Course – standard paver base specification
Handling & Installation – A protective pad is required when doing the final paver compaction. Be sure to offset joints for best appearance. Cutting is seldom required if you are installing a curvilinear walkway. Minimum radius 6 feet for curved applications. Install from multiple pallets for best color distribution.
· all paver applications and as accents in walls
Jointing Material and Joint Stabilization
· Good: Ordinary dry joint sand
· Better: Unicare Polymeric Sand, Techniseal RG+, Alliance XP
· Best: Ordinary dry joint sand stabilized by a water-based or solvent based joint sand stabilizer (joint sand stabilizer sealer may make the surface slightly slippery).
o Polymeric sand is often installed too high in the joint. Ensure the sand level is lower than the paver surface to allow for a three dimensional appearance.
o Alliance Gator Maxx Polymeric Sand is recommended for concrete overlays.
· Product may be sealed but it is not absolutely required
· Sealers generally decrease the slip resistance of a product
· Unilock Unicare, Surebond, BP Pro and Techniseal sealers can be used.
· Semi-gloss sealers will still appear glossy on this product. Please test a stone to ensure the desired effect.
· Product must be cleaned before sealing
Cleaners – Any paver cleaner from Unilock, Techniseal, Surebond or BP- Pro is acceptable.
Special note: Other than overlay on concrete stoops and steps, you should have a bedding layer between the pavers and the poured concrete surface to avoid issues with height variance
Colors, product data, and availability are subject to change without notice. Please confirm all details with your local Unilock Dealer or call 1-800-UNILOCK (1-800-864-5625) for availability in your area. The colors shown should only be used as a guide. Final color selections should always be made from actual samples.